ICS51230-36, Sawstop, 5HP Industrial Table Saw, 1ph, 230v 60Hz. 36″ T-Glide Exclusive Design

ICS51230-36, Sawstop, 5HP Industrial Table Saw, 1ph, 230v 60Hz. 36″ T-Glide

The SawStop® Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10″ cabinet saw available. The 5HP, 1ph, 230v configuration with a 36″ Industrial T-Glide Fence Assembly offers the durability, versatility, and the peace of mind only SawStop’s patented safety system can provide.

Features:

• Patented Safety System
• 99% Dust Collection System
• Fast Blade Height Adjustment
• Easy Reach Start and Stop Switch
• Durable Powder Coat Fisnish
• Machined Cast Iron Table
• Large 4″ Dust Port
• Smooth Cranking Height and Tilt Adjustments
• Available Integrate Mobile Base (Not Standard Equipment)
• Fast, toolless insert

Specifications:

• Motor: (all 60Hz, TEFC):5.0hp, 1 Phase, 230V, 20.5A
• Cabinet footprint:20″ w x 25″ d
• Cast iron table:24″ w x 30″ d
• Cast iron table (w/ extension wings):44″ w x 30″ d
• Extension wings:10″ w x 30″ d each
• Extension table 36 in rails:24″ w x 30″ d
• Weights – w/ 36 in fence systems:635 lbs
• Blade:Prof. grade, 5/8″ arbor
• Blade diameter:10″
• Blade tilt:Left
• Blade kerf:0.118″ (3mm)
• Blade plate thickness:0.078″ (2mm)
• Max. depth of cut, blade at 0º:3 1/8″
• Max. depth of cut, blade at 45º:2 1/4″
• Max. rip, right of blade – 36 in:36 1/2″ (w/ optional 36″ rails)
• Max. rip, left of blade:12 1/2″
• Max. rip, left of blade (options):N/A

• Dado diameter:8″ (requires a separate brake cartridge and insert)
• Dado max. width:13/16″
• Arbor diameter at blade:5/8″
• Main bearing size:62mm OD x 30mm ID
• Second bearing size:52mm OD x 25mm ID
• Table in front of blade (max. elevation):10 3/4″
• Table behind blade (max. elevation):10″
• Arbor Runout:0.001″ Maximum allowable runout
• Table flatness measured diagonally:0.010″ Maximum gap
• Blade alignment with miter slot:0.010″ Maximum displacement
• Deviation of miter gauge indexing stops from actual:±0.25º
• Alignment between splitter and blade:0.010″ Maximum difference
• Miter slots T-shaped:3/4″ at top, 1″ at bottom, 3/8″ deep
• Miter slots center:11 1/8″ center-to-center
• Miter slots info:5 1/2″ (arbor flange to center of right slot)
• Dust collection port diameter:4″
• Riving knife / splitter thickness:0.090″ (2.3 mm)
• Blade guard (dust collection):polycarbonate, extends only 1 3/16″ to right of blade
• Blade guard (micro guard):N/A
• Insert:zero clearance, phenolic core, melamine surfaces
• Hand wheels:8″ diameter, cast iron w/ chrome handle
• Belts:2 V-ribbed belts
• Overall saw dimensions:44″ w x 34″ d x 34″ h
• Overall saw dimensions 36 in:69 1/4″ w x 36 1/2″ d x 34″ h
• Motor 5 hp, 1 phase, 230V, 20.5 A