9680213, Palmgren 9inx20in Bench Combination Engine Lathe & Vari Speed Mill
Palmgren’s combination 9˝ bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines. Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance. The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque. With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.
Specifications:
- Spindle Speed: 125 to 2000 RPM
- Distance Between Centers: 20″
- Spindle Taper: MT3
- Tailstock Taper: MT2
- Length: 49
- Motor: 5/8HP – 115V – 10Amps -1PH – 60Hz
- Warranty: 3 Year
- Height: 33-1/2″
- Compound Slide Travel: 3-9/16″
- Spindle Hole: 1″
- Chuck Size: 5″
- Tailstock Sleeve Travel: 2-1/2″
- Mill Weight: 132
- Z-Axis Travel: 10-1/2″
- Spindle Holding Fixture: MT2 3/8″-16 Draw Bar
- Spindle Travel: 2″
- 4 Position Tool Post Height: 3-3/4″
- Max Turning Diameter: 9-7/8″
- Low Range: 100 – 1500
- Lathe Weight: 452
- Distance Between Center and Compound Table: 3″
- Gear Stages: 2
- Drilling Capacity: 5/8″
- Table Width: 4-3/4″
- Lathe Motor: 1PH – 115V – 13.6 Amps – 1PH – 60 Hz
- High Range: 200 – 3000
- Working Radius: 6-3/4″
- Table Length: 15 3/4″
- Y-Axis Travel: 4-21/64″
- X-Axis Travel: 6-1/4″
- Travel Top Slide: 19-1/2″
- Pitch – (metric/inches) (TPI): 0.2 – 4 / 8 – 56
- T-Slot Size/Distance/Qty: 3/8″
- Miling Capacity of End Mill Cutter: 3/4″
- Swivel of the Milling Head: + / – 90 degrees
- Depth: 23
- Number of Speeds: 6
- Milling Capacity of Insterted Tooth Cutter: 2-1/2″
- Longitudial Feed: 0.003″ 0.004″ 0.006″ 0.008 0.012″ 0.016″
- Height of Centers: 4-3/4″
Reviews
There are no reviews yet.