690502, JET JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar Fashionable

690502, JET JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar

Constructed using the Meehanite® casting process. The new Electronic Variable Speed Milling Machines provide consistent and reliable operation and newly designed column and base incorporates a ridged, robust design.

Features:

• New! JET designed Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
• Swing away control box houses an e-stop and puts all controls at the operators fingertips
• The innovative design of the machine base provides an easier solution to level the machine without raising it up off the floor
• Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
• For added safety, the heavy-duty spindle break stops the spindle and interrupts the power, preventing accidental start-ups
• The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
• CSA/CUS Certified
• Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
• Spindle head is internally cooled extending bearing, belt and motor life
• Precision ground table and ways are hardened up to 54 RHC to a depth up to 2.0mm
• The X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movements
• Standard Equipment
• Swing away safety shield
• LED work lamp
• Chip pan
• Dual locks on all moveable surfaces
• Way covers
• Drawbar
• Tool box with tools

Specifications:

• Powerfeed X-Axis
• Power Draw Bar Pneumatic
• Table Size (L x W) (In.) 9 x 49
• Quill Diameter (In.) 3-3/8
• Number of Spindle Speeds Variable
• Range of Spindle Speeds (RPM) 60 – 4,500
• Quill Down Feed Rates (IPR) .0015 – .003 – .006
• Spindle Travel (In.) 5
• Head Movement (Deg.) 90° R & L, 45° F & B
• Max Distance Spindle to Table (In.) 20-3/4
• Distance Spindle to Column (Max.) (In.) 18-1/8
• Distance Spindle to Column (Min.) (In.) 4-3/4
• Collet Capacity 1/8 – 7/8
• Table Longitudinal Travel (In.) 36
• Table Longitudinal Travel With Powerfeed (In.) 30-3/4
• Table Cross Travel (In.) 12-5/8
• T-Slots Number and Size (In.) 3 and 5/8
• T-Slot Centers (In.) 2-1/2
• Work Table Weight Capacity (Lbs.) 720
• Travel of Knee (In.) 15-3/4
• Travel of Ram (In.) 15-1/4
• Saddle Width (In.) 11-1/2
• Column Width (In.) 18
• Inverter Type Delta, B
• Motor (HP) 3HP, 230V, 3Ph
• Overall Dimensions (L x W x H) (In.) 67 x 64 x 86
• Weight (Lbs.) 2,420

Red Assurance 2-year Warranty:

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.