376903, JET JLH Series 3 Ton Lever Hoist, 20′ Lift with Overload Protection & Shipyard Hooks Exclusive

376903, JET JLH Series 3 Ton Lever Hoist, 20′ Lift with Overload Protection & Shipyard Hooks

JET® JLH Series Lever Hoists incorporate safety, durability, and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. The JET® JLH Series is available in ¼ ton to 9 ton capacities, with standard lifts of 5, 10, 15, and 20 feet (custom lifts available). Whether it’s inverted, vertical, horizontal, or any other load angle, the JET® JLH lever hoist is the solution for your heavy-duty industrial needs.

Features:

• Safety
• Patented fused brake design with proven durability with a lifetime warranty
• Slip clutch design overload protection prevents lifting or pulling damaging loads
• Weston Style, double pawl brake design splits the load to opposite sides of the ratchet gear for greater load security
• Improved free chaining to quickly take up and position slack chain and not accidentally free chain under load.
• Patented handle design allows for extra clearance between the operator’s hand and load chain
• Enhanced ergonomic grip allows for greater operator control and increased comfort
• Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
• Hooks slowly stretch to indicate an overload situation increasing jobsite safety
• Blunt tip, point loading Shipyard hooks virtually eliminate stretched hooks, reducing downtime for maintenance and repair
• Durability
• Shorter handle, smaller body and lightweight design for low headroom applications and use in confined areas
• Heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
• Caged needle bearing design increases efficiency and promotes smooth operation
• Corrosive resistant grade 100 load chain is stronger than grade 80 load chain
• Cast steel safety latches are secured with Allen screws and lock nuts
• Impact resistant all steel construction for added durability and protection
• Standards
• This product complies with ANSI / ASME B30.21 and HST-3 standards
• Load tested to 125% of capacity with certificate

Specifications:

• Load Capacity (Tons) 3
• Lift (Ft.) 20
• Overload Protection Yes
• Ship Yard Hooks Yes
• Headroom (In.) 15-5/9
• Handle Length (In.) 16-5/16
• Lever Pull Force (LBF) 84
• Lift per Turn (In.) 3/4
• Number of Falls 1
• Load Chain Dimensions (Mm.) 10 x 28
• Load Capacity (Metric Tons) 3.2
• Hook Throat Opening (In.) 1-1/2
• Overall Width (In.) 7-1/2
• Weight (Lbs.) 53

Red Assurance 5-year Warranty:

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.